Callaway X Forged CB Irons and X Forged UT Utility
Irons

Callaway X Forged CB Irons and X Forged UT Utility

Callaway X Forged CB Irons and X Forged UT Utility

2021 Callaway X Forged – Key Takeaways

  • Callaway has launched two new offerings in its X Forged CB Series.
  • The X Forged CB iron is a technology-driven iron designed with PGA TOUR players in mind.
  • The X Forged UT utility complements the CB with a higher-launch, more forgiving utility iron.
  • Retail Price is $200 for the X Forged CB iron and $250 for the X Forged UT Utility.

a photo of the Callaway X Forged CB Iron

At the most basic level, Callaway’s objective for the new X Forged CB iron (and X Forged UT utility) was to bring a little bit of innovation to a category where we typically don’t find it. To do it without sacrificing consistency, control or feel … all the better, I suppose.

That’s not to say Callaway is alone in this endeavor. The case can easily be made that options like the Mizuno MP20 HMB and the TaylorMade P770 represent the same sort of irons.

Callaway puts the X Forged CB in the (better) player’s iron category and, by any reasonable measure, it’s a legitimate TOUR iron.  It doesn’t get much better player’s than that but there’s enough technology to suggest the design straddles the player’s side of the player’s distance category.

Callaway X Forged CB – A True TOUR Iron

With consideration for the category and the audience, X Forged CB shaping is exactly what you’d expect.

The blade length is short, the sole is narrow and the topline is thin.

Everything about the design is intended to appeal to better players. That includes an emphasis on workability. It’s a vague descriptor that speaks both to a comparative lack of forgiveness (it’s not a game-improvement iron) and the shorter blade length, which keeps the center of gravity closer to the shaft axis.

While that’s all part of the accepted vernacular for a Tour iron, it’s reasonable to wonder if, as the artistry of the game is coldly stomped by the unyielding truths of hard math and analytics, the language of the elite player will adapt to reflect that reality that the shortest, most efficient and best-scoring distance between two points (the ball and the flag, for example) is almost always a straight line. The shaping of shots may become the rarest of sales pitches.

I’ve digressed earlier than usual. Let’s move on.

By no small measure, innovative opportunities in the category are stymied by geometry but like everybody else, Callaway seeks to make the most of the limited real estate.

Tour-Tuned Faceplate

To that end, Callaway has paired a forged 1025 mild carbon steel body with a 17-4 “Tour Tuned Face Plate.” Let’s table the discussion about whether the forged piece should be the one that hits the ball for a later date and instead focus on the faceplate.

From a performance perspective, the plate sits in a space between a single-piece design and a speed-oriented face cup. Callaway’s supercomputers were tasked with creating something that provides better players with a bit more speed without sacrificing consistency. The center of the face prevailed though there’s some help to be had on the edges of center. The design emphasizes spin consistency (what Callaway calls “spin robustness”) across the face.

Callaway X Forged CB Construction

Callaway is from the school of thought that believes hollow-body irons should be filled. To that end, the X Forged CB iron features a MIM’d tungsten internal toe weight. Weights range from nine to 14 grams depending on the iron.

The primary purpose of the toe weighting is to offset the weight of the hosel by pulling the center of gravity down and away from the heel. Let’s call the result low and reasonably centered.

Urethane Microspheres – Callaway’s Cavity Goo

Callaway’s increasingly ubiquitous urethane microspheres are injected into the cavity to improve feel.

Our brief departure in today’s story is this: While there’s almost always a Speedy McSpeed story around the various goo fillings manufacturers inject or otherwise cram into their irons, in reality their purpose is almost entirely to dampen vibrations and improve feel.

 

Tungsten Cavity Weighting

The bit of visible tech on the X Forged CB back cavity comes by way of tunable tungsten weights used to dial in swing weight. The standard weight plate is 17  grams. Twelve- and 22-gram versions are available. I’d be remiss not to point out that these aren’t designed to be user swappable. It’s a factory operation, guys, though I suspect somebody will offer aftermarket options eventually … maybe something in a bold purple.

It should go without saying that Callaway isn’t the only brand offering this particular flavor of swingweight tuning but, frankly, every company should be willing to forgo innovation points in favor of a common-sense approach that allows for easy swingweight adjustment without having to rely on tip weights which pull the center of gravity toward the heel.

To its credit, Callaway isn’t claiming any speed benefit from its microspheres in the X Forged CB. Feel is the whole of its story.

Top to bottom or, I suppose, toe to heel, it’s a package designed to appeal to better players because it’s designed to be played by the best players in the world. It’s a design that emphasis shot-making control over, though not to the complete exclusion of, forgiveness.

the address view of the Callaway X Forged CB iron

Callaway X-Forged CB – Who It’s For

While Callaway’s Alan Hocknell says the X Forged CB offers a surprising amount of forgiveness, all things in the golf equipment world are relative. Is it more forgiving than the new Callaway Apex MB? Sure. As forgiving as standard Apex? Not even close.

Your audience here is Tour players, elite amateurs and single-digit handicappers who are willing to forgo forgiveness in favor of a more appealing shape.

Callaway X Forged CB – Specs, Pricing, and Availability

a spec chart for the callaway x forged cb irons

While lofts are a tick stronger than Callaway’s new Apex MB, X Forged CG lofts should rightly be described as modern but not jacked. That’s driven by the lower center of gravity (and the resulting increase in dynamic loft). Bottom line: the 33-degree 7-iron and a 45-degree PW are perfectly reasonable for the category.

Stock shafts are the Project X IO steel and Mitsubishi MMT graphite.

The stock grip is a Golf Pride Z Grip.

Retail price for the Callaway X Forged CB Iron $200 per iron. The quick math puts us at $1,400 for a seven-piece set.

Callaway X Forged UT

a photo of the Callaway X Forged UT Utility Iron

As you’d expect from a namesake utility, CB inspired X Forged UT are designed to pair with new irons. Much of the tech is the same. Hollow-body construction? MIM’d tungsten? Cavity tungsten? Urethane microspheres?

You betcha. Check, check, check, check.

It’s a pretty simple story here. Relative to the X Forged CB iron, the X Forged UT is just bigger (in all directions), a little more forgiving, and easier to hit – especially with respect to higher launch and the softer landing that comes with it.

X Forged UT – AI Flash Face Cup

With the X Forged UT, you get the full benefits of an AI designed Flash Face Cup. In addition to all of that juicy spin robustness, there’s a greater emphasis on speed with the utility iron but the lower center of gravity should produce higher launch and more stopping power into greens.

a photo of the cavity of the Callaway X Forged UT

Mind Your Speed

Bear in mind that, in addition to a more speed-centric design, X Forged UT lengths are ½” longer than the comparable X Forged CB long irons. That’s going to create more distance versus an iron with the same number on the sole. Spreading out your gaps on the long end is often advisable – especially for average golfers – but it’s something you’ll want to keep an eye on.

Consider this a casual reminder to check your gaps, particularly at the long end where things can get messy in the spaces between fairway woods, hybrids, utilities and long irons.

Callaway X Forged UT – Specs, Pricing and Availability

The Callaway X Forged UT is available in 18, 21 and 24 degrees.

The stock steel shaft is the Project X U, which was specifically designed for utility irons. I should probably mention that Callaway is the exclusive launch partner for the PX U.

The stock graphite shaft is the Project X Smoke Blacky HY. Aimed at aggressive swingers, it features a low-launch, low-spin profile.

Retail price for the Callaway X Forged UT is $250. Retail availability begins on Oct. 29.

For more information, visit CallawayGolf.com.

For You

For You

News
Apr 22, 2024
Strength Training for Golfers: Building a Strong and Stable Core
Golf Balls
Apr 22, 2024
Callaway Supersoft Mother’s Day Bouquet
Golf Technology
Apr 21, 2024
Testers Wanted: Shot Scope V5
Tony Covey

Tony Covey

Tony Covey

Tony is the Editor of MyGolfSpy where his job is to bring fresh and innovative content to the site. In addition to his editorial responsibilities, he was instrumental in developing MyGolfSpy's data-driven testing methodologies and continues to sift through our data to find the insights that can help improve your game. Tony believes that golfers deserve to know what's real and what's not, and that means MyGolfSpy's equipment coverage must extend beyond the so-called facts as dictated by the same companies that created them. Most of all Tony believes in performance over hype and #PowerToThePlayer.

Tony Covey

Tony Covey

Tony Covey





    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

      Bobby

      3 years ago

      Are you certain that the X Forged CB has microspheres? That they are in a cavity behind the tungsten plate?
      My understanding is that this is non hollow with no microspheres.

      Reply

      Freddie

      3 years ago

      Why is the price point $40 more than the MBs and The Apex Pro? What am I missing?

      Reply

      LABillyboy

      4 years ago

      Looking for a UT to improve on the Epic 3 iron I have today. I’ll have to wait a couple more weeks it looks like… my 3 is 18* 40.0 D0… .220 offset… Looking to get something with less offset.

      Reply

      Mark M

      4 years ago

      LABillyBoy, I play the 2018 X Forged UT in 21° & 24° (just added a couple of weeks ago) and love the look and performance. They match up well with my Cobra Forged Tour set, with an offset of only .140 versus the 2.159 & 2.032 of the 2020 version. You can probably get a good deal on them now too.

      Reply

      Hook DeLoft

      4 years ago

      I like the sort of industrial look, but I don’t know why you would bother using a forged head for a hollow iron with a 17-4 steel face.

      Reply

      Stephen

      4 years ago

      I hope these perform well in testing…because they’re ugly. Really ugly. Did I mention they’re ugly.

      Reply

      Art Springsteen

      4 years ago

      Ten years ago these might have helped. I’m almost 72 and while the handicap is 7-8. the swing speed isn’t fast enough to take advantage of the new technologies. So I guess I’ll live with my Hogan PTPros and experiment with the Cobra single length set I picked up to fool around with.

      Reply

      Jack B.

      4 years ago

      “every company should be […] in favor of a common-sense approach that allows for easy swingweight adjustment without having to rely on tip weights which pull the center of gravity toward the heel.” I totally agree with your statement and see this back plate as an innovative way to do it.
      Is the hollow area behind the striking face separate or joined to the cavity behind the back plate? If one were to remove the back plate, would microspheres spill out?

      Reply

      Ryan

      4 years ago

      So exactly where does this fit in the Callaway line in terms of supposed playability, size, etc.? Does it fit between Apex and Apex Pro? Or between the Apex pro and the MB?

      Reply

      Al

      4 years ago

      Between the Apex MB and Apex Pro. Its a cavity back players iron. Apex Pro being more of a players distance iron and Apex MB being a blade.

      Reply

      snapjack

      4 years ago

      As a Callaway player I’d have to say the new TaylorMade irons make these look half done. Of course, this is based on looks and my opinion but when it comes down to all these new fantastic clubs what are the differences really? Looks!

      Reply

      Telanie Strydom

      4 years ago

      Really love the look. Think they would look good in my bag

      Reply

      Daryl

      4 years ago

      Great article Tony. Even though these are not for me I love that I get a refresher in some club design elements that do apply to me :)

      Reply

      tscdave

      4 years ago

      I would be fun to try these.

      Reply

      Mark

      4 years ago

      Hit both these the other day. Very solid, love the look of these.

      Reply

    Leave A Reply

    required
    required
    required (your email address will not be published)

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    News
    Apr 22, 2024
    Strength Training for Golfers: Building a Strong and Stable Core
    Golf Balls
    Apr 22, 2024
    Callaway Supersoft Mother’s Day Bouquet
    Golf Technology
    Apr 21, 2024
    Testers Wanted: Shot Scope V5
    ENTER to WIN 3 DOZEN

    Titleist ProV1 Golf Balls

    Titleist ProV1 Golf Balls
    By signing up you agree to receive communications from MyGolfSpy and select partners in accordance with our Privacy Policy You may opt out of email messages/withdraw consent at any time.