First Look: Ben Hogan Ft. Worth White Irons
Irons

First Look: Ben Hogan Ft. Worth White Irons

First Look: Ben Hogan Ft. Worth White Irons

In a world filled with at least fifty shades of gray, it’s nice to know some things really are black and white.

Like irons.

The Ben Hogan Company continues its march forward today with another new iron set, but with today’s release of the new Ft. Worth White, the newness is only cosmetic.

Whiter Shade of Pale

Hogan introduced the Ft. Worth Black irons back in April, and the big deal was that they were, you know, black.

The Ft. Worth White irons aren’t.

But then again, they’re not really white, either, unless you think of chrome as white.

“We brought out the White version in response to consumer demand,” says Hogan CEO Scott White. “We were overwhelmed by the number of accomplished players who wanted that iron with a more traditional finish.”

Ebony & Ivory

Outwardly, the new Ft. Worth Whites look an awful lot like Hogan’s original Ft. Worth 15 irons, which isn’t a bad thing, but they are chrome versions of the Ft. Worth Black. That means a slight bounce alteration to the V-Sole for better turf interaction (especially on partial shots), and CG adjustments iron-to-iron.

“We’ve optimized our Dynamic Progressive Weighting System,” says White. “It’s size, shape, and placement of the Depression Cavities on the rear of the club throughout the set. This provides higher trajectories on long irons and lower, more penetrating flights on the short, scoring irons.”

And as with the Ft. Worth Black irons, the new Whites feature traditional club numbers instead of lofts.

Looking Ahead

Scott White has been nothing if not consistent in guiding Hogan back from the brink, repeatedly stating it’ better to do a few things well than a lot of things poorly, and that new product introduction will be deliberate and measured.

That said, even though the Ft. Worth White is more line extension than new product; it is the fourth new club in the Hogan arsenal introduced this year – joining the Ft. Worth Black and Edge irons and the Equalizer wedges. Apparently, Hogan’s Direct-To-Consumer and Factory-Direct Pricing strategy is working.

“We’ll probably have some additional products, or product line extensions this year,” White tells MyGolfSpy, “and DEFINITELY (his emphasis) in 2019. Because we aren’t beholden to retailers’ demands, we’ll bring them out when they’re ready. We don’t have – or need – a formal new product launch schedule.”

White also says it’s possible they may add to the Hogan Tour Staff (currently consisting of J.J. Henry and Mark Brooks, but the company won’t add costs that would have to be passed on to the consumer. Instead of a Tour Staff, Hogan has created something fairly unique with its Brand Ambassadors, a social media army of Hoganistas to help promote the brand.

Ft. Worth White Price/Availability

The new Ft. Worth White irons are available starting today on the Hogan website, at $700.00 for a 4-PW set. Shaft options include KBS Tour V, KBS Tour 90, True Temper Dynamic Gold and UST Recoil. As is the Hogan way, there’s no upcharge for graphite, and loft, length, lie and swing weight adjustments are free.

As of right now, both the Ft. Worth White and Black irons are available in right-handed versions only (the Edge and PTx irons, and the Equalizer wedges are available for lefties). Currently, only the Black versions are available in Hogan’s two-club, two-week demo program.

For You

For You

Golf Wedges
Apr 16, 2024
Vokey WedgeWorks Low Bounce K Grind Wedge
News
Apr 16, 2024
It Was A Masters To Forget For LIV Golf
Golf Apparel
Apr 16, 2024
adidas Pioneers Next Generation of Lightweight Golf Garments
John Barba

John Barba

John Barba

John is an aging, yet avid golfer, writer, 6-point-something handicapper living back home in New England after a 22-year exile in Minnesota. He loves telling stories, writing about golf and golf travel, and enjoys classic golf equipment. “The only thing a golfer needs is more daylight.” - BenHogan

John Barba

John Barba

John Barba

We Tried It: Penfold Sunday Stand Bag
Apr 18, 2024 | 5 Comments
Shot Scope V5 Golf Watch
Apr 3, 2024 | 14 Comments
Driver Shopping Do’s and Don’ts
Mar 29, 2024 | 5 Comments
John Barba

John Barba

John Barba





    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

      Brad

      6 years ago

      I actually liked having the lofts on the sole and think they should have gone the route of Cleveland with their CBX irons and placed the iron # as well as the loft rather than removing the loft entirely. Don’t see the point of calling them “white” either when they are just traditional chrome – like most every other iron ever made.

      Personally, I would just find a set of slightly used Fort Worth 15 irons rather than buying these new. Performance would be 99.999% identical.

      Reply

      golfraven

      6 years ago

      The black finish is really appealing. I guess 700$ is a good price considering what others are charging. Maybe there will be one set of Hogans in my hands one day again.

      Reply

      Tom Stevens

      6 years ago

      Perhaps this is the beginning of their 2019 campaign?

      Reply

      stsve

      6 years ago

      interesting that on the hogan site they have removed the phrase about “DBM lasting up to 7 times longer than nickel chrome”…

      Reply

      browny55

      6 years ago

      It’s look like the old Mizuno Cut Muscle technology.

      Reply

      Graham Fee

      6 years ago

      I love these irons! I’ve played them for a couple of years now (back when just the lofts were stamped on). I really like the Black version… The shift to direct purchase/manufacturing makes a ton of sense. However, with Hogan, at least the consumer is getting a break in cost. You can buy directly from TM or Callaway, but you’re still going to pay full retail. I only wish I had more customization options with Hogan. Not having a light-weight DG option has stopped me from purchasing at least three times.

      Reply

      Rick Emerson

      6 years ago

      I think you should call them. I had a set of the older version made a few years ago and I communicated with them and had Nippon Modus 3’s installed in mine. I bet they can put in whatever shaft you want for a small upcharge.

      Reply

    Leave A Reply

    required
    required
    required (your email address will not be published)

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Golf Wedges
    Apr 16, 2024
    Vokey WedgeWorks Low Bounce K Grind Wedge
    News
    Apr 16, 2024
    It Was A Masters To Forget For LIV Golf
    Golf Apparel
    Apr 16, 2024
    adidas Pioneers Next Generation of Lightweight Golf Garments
    ENTER to WIN 3 DOZEN

    Titleist ProV1 Golf Balls

    Titleist ProV1 Golf Balls
    By signing up you agree to receive communications from MyGolfSpy and select partners in accordance with our Privacy Policy You may opt out of email messages/withdraw consent at any time.