First Look: Srixon Z 85 Woods
Fairway Woods

First Look: Srixon Z 85 Woods

First Look: Srixon Z 85 Woods

Here’s a truism for you to ponder on this fine Monday: in the game of Metal Wood Musical Chairs, there are only so many seats. And when the music stops, you better have a chair.

If you’re TaylorMade, Callaway, PING, Titleist or Cobra, your seats are already saved. You have Tour validation and you can advertise the bejeezus out of anything you sell. Challenger metal wood brands have to catch and claw for their seats. The Wilsons, Mizunos and Srixons of the world have to fight every day to try to grab that last chair and to get your attention.

With today’s release of its new Z 85 line of drivers, fairways and hybrids, Srixon is making a compelling case not only for a chair, but a seat at the head table. And they guaranty it.

Risk, Reward & Z 85

“You have to take some risks, otherwise you’re not giving the consumer any compelling reason to switch from Callaway or TaylorMade,” said Zack Oakley, Srixon’s brand manager, at an equipment summit with MyGolfSpy staffers earlier this month. “Those guys have been at the top for so long, and they make a great product.”

Srixon’s Z 565 driver was, of course, MyGolfSpy’s Most Wanted for 2017, and its better-player focused sidekick, the Z 765, finished fifth overall. Both sold decently at retail, but Srixon is aiming higher this year, and is taking some bold steps to get your attention with its two new models, the Z 585 and Z 785.

“With these products, we have something that can stand up to, and even surpass, Callaway and TaylorMade in terms of performance,” says Oakley.

While Srixon’s new Z 85 iron lineup is evolutionary, Srixon firmly believes its new drivers are more of a revolutionary upgrade from its predecessors, featuring three key innovations: a new titanium cup face, a carbon fiber crown and the most upscale stock and no-upcharge shaft offerings the industry has seen to date.

Srixon is literally guaranteeing you’re going to like these new drivers.

Yes, that’s foreshadowing, but let’s start by taking a peak under the hood.

Titanium + Carbon Fiber

The new Z 585 and 785 drivers both have titanium cup faces. That alone isn’t revolutionary – the Z 65 series drivers had titanium cup faces, and so do other drivers. For this go round, Srixon is using a stronger and lighter titanium, called Ti51AF.

“It has a very high strength to weight ratio, and hasn’t been used in golf before,” says Brian Schielke, Srixon’s marketing manager. “It’s 8% stronger and 1% lighter than Ti 6-4, which we used before.”

What that means is the Z 85 cup faces are 10% thinner than the Z 65’s, and as we’ve all learned in Golf Physics 101 – lighter and thinner means hotter and longer. Srixon says the Z 85’s have thinner faces than TaylorMade’s M4, and a thinner perimeter than both M4 and the PING G400. Their own internal testing shows 2 to 3 MPH more ball speed than M3, M4, Rogue and G400. While you’re right to be skeptical of any OEM’s internal testing, we’ll share some data from two MyGolfSpy staffers in a bit that will make you go hmmm….

Ball speed, of course, wins on launch monitors and it makes Tour players pay attention. None of Srixon’s Tour staff gamed either of the Z 65 drivers, but the 85’s have most definitely made an impression.

“We have five already in play now, where we didn’t have any of the old ones in play,” says Schielke. “Keegan picked up ball speed over his M2, GMac picked up ball speed, so did Will McGirt. Ryan Fox, who just lost the Irish Open in a playoff, has one in play.”

Both drivers also feature a new carbon fiber crown. Again, not new to drivers, but it is new to Srixon.

“The crown is kind of dead weight,” says Oakley. “If you can make the crown lighter is lowers the Center of Gravity and pulls it back a bit farther, so you can have more perimeter weighting and more forgiveness.”

Srixon sources its carbon fiber from Mitsubishi chemical and, thanks to its Miyazaki shaft factory in Japan, is one of Mitsubishi’s largest customers. The carbon formula used in the Z 85’s helps not only heel-toe MOI, but also sound and feel. The Z 65 models, while solid performers, could sound a little clinky, which impacts feel. The Z 85’s, however, feature more of a muted sound and feel, as though the ball is staying on the face just a hair longer.

Adjustable vs Non-Adjustable

Both the Z 785 and Z 585 are 460cc and have similar head shapes. The 785 sets up neutral and delivers a more penetrating ball flight, while the 585 has a slight draw bias and a higher launch. One other key difference: the 785 has an adjustable hosel, while the 585 is non-adjustable.

“We expect the 785 to sell more and fit more golfers,” says Schielke. “If you’re a better player who likes to fine tune face angle, loft and lie, we have the 785. If you just want to hit it straight, high and far, there’s the 585.”

The 585 does have a slightly higher MOI, largely due to the fact it doesn’t have as much weight in the hosel.

Most every OEM has two driver offerings, and a growing trend has been for one to have maximum adjustability and the other to have little to none. TaylorMade’s M3/M4 and Mizuno’s GT/ST are prime examples. Srixon’s offering is sorta, kinda similar, although the Z 785 is nowhere near as adjustable as  the others, and that’s intentional.

“We definitely considered moveable weights – there are pros and cons,” says Shielke. “Moveable weights are costly, and they do take the center of gravity away from the maximum performance area.”

“Moveable weights certainly help you fine tune,” adds Oakley. “For Tour guys who can notice a degree or two in ball flight or a little bit less or a little bit more spin, it probably means more. For the overall market and most golfers, though, you’re literally fine tuning with little bits and pieces.”

“M3 may have more options, but that means more worse options,” Schielke says. “Weight tracking systems are more of a marketing bullet point.”

Shafts, however, are not.

Standard Goes Upscale

Remember the MyGolfSpy article on the shady world of stock driver shafts? Well, Srixon is giving made-for and watered-down a good swift kick in the you-know whats. The stock shaft for the Z 785 driver is a real deal, honest to goodness Handcrafted HZRDUS Black.

“We want to make sure we’re giving the most Tour authentic components out there,” says Oakley. “These are made at the Project X Lab in San Diego, where they make all the Tour parts.”

The Z 585 comes standard with the standard HZRDUS Red, but you can get the handcrafted version with the 585 if you want. In fact, Handcrafted Black, Yellow or Red are all available at no upcharge. Srixon is the only OEM offering the HZRDUS Handcrafted as stock.

And remember that foreshadowing alert from a few paragraphs ago? Well, Srixon is so sure you’re going to really dig its new drivers that it’s taking the unprecedented step (for an OEM) of offering you a 60-day money back performance guaranty.

“We understand that for woods, Srixon hasn’t been a big brand,” says Schielke. “There might be some apprehension to try it, so this lets you try it risk free.”

Now that’s testicular fortitude.

“We weren’t going to do it, and we wouldn’t have done it if the test results weren’t so good,” adds Schielke. “It shows we believe in it, and it’ll be a decent part of our marketing effort. We’re going to talk performance first – it goes farther than your current driver – and we’re so confident that we’ll back it up with this guaranty.”

So does it perform? MyGolfSpy’s two young guns – Sam Robinson and Harry Nodwell – put the Z 785 up against their gamers earlier this month to see. Both game PING G400’s – Sam the MAX and Harry the LST – both played college golf and both are bombers, with swing speeds in excess of 110 MPH.

When Sam tested his gamer, he was averaged 162 MPH ball speed and 290 yards. His first numbers with the Srixon were similar, but a slight loft adjustment got his ball speed up to 167 MPH. Sam’s spin and launch angle didn’t vary much, but he did gain nearly 10 yards of carry, with drives averaging around 303 yards.

Harry was a tougher fit. His PING was giving him 173 MPH ball speed and an average of 300 yards. Again, his first swings with the Srixon didn’t show much improvement until he put the same shaft in his Srixon as he had in the PING. His ball speed immediately jumped to 177 MPH with distance ranging from 312 to 318.

Fairways & Hybrids

As with any metal woods launch, hybrids and fairways tend to get lost in the driver shuffle. If you’re in the market, however, you will want to put the new Srixons on your demo list.

The Z F85 fairways share much of the same DNA as the drivers, with a hot HT 1770 steel cup face and a carbon fiber crown in both the 3 and 3+ for more ball speed. There’s also an interesting twist to the cup face. Literally.

“TaylorMade has people talking about bulge and roll again,” says Schielke. “But we actually have three different bulge regions and two different roll values on the face. We’ve been doing this in clubs for a long time.”

That sure does sound like Twist Face, does it not?

The hybrids may wind up being the secret weapon in the Srixon arsenal. They H85 models are noticeably larger than the H65 models, as Srixon hopes to fit a wider group of golfer with a an easier to hit, easier to launch hybrid that’s not a hook-machine.

“These are a little bit bigger, but also significantly hotter,” says Schielke. “About 20 COR points hotter than our previous models, and actually hotter than Rogue.”

Hotter than Rogue? Without Jailbreak? What kind of voodoo is this?

“No voodoo,” says Schielke. “It’s pretty simple: a thinner, slightly bigger face means you can get a hotter face. It’s that big trampoline vs. small trampoline thing – you get more bounce.”

Pricing and Availability

The Srixon Z 785 will retail for $499 and will be available in 9.5 and 10.5 degree models. The 785 features a fully adjustable hosel and, as stated earlier, the Project X HZRDUS Black 65 Handcrafted shaft is stock.

The Z 585 driver retails for $399 in 9.5 and 10.5 degree lofts. It’s nonadjustable and comes with the HZRDUS Red 65 shaft as stock.

The full complement of HZRDUS Handcrafted shafts are available as no upcharge options. The Even Flow Handcrafted Blue 65, Mitsubishi Tensei CK Pro Blue and Orange, Fujikura Atmos Tour Spec Black and the UST Mamiya Helium 4 are among the shafts available for a $100 upcharge.

The F 85 fairways will retail for $249 and come with the HZRDUS Red 65 stock. They’ll be available in 3+, 3 and 5.

The H 85 Hybrids will come stock with the HZRDUS Hybrid Black 85 and will be available in three lofts: 16-, 19- and 22-degrees.

Presale starts today on Srixon’s website and at selected retailers. The products will be in stores September 14th.

For You

For You

Golf Shafts
Apr 14, 2024
Testers Wanted: Autoflex Dream 7 Driver Shaft
News
Apr 14, 2024
A Rare Masters ‘L’: Day Asked To Remove Sweater
Drivers
Apr 13, 2024
Testers Wanted: Callaway Ai Smoke Drivers
John Barba

John Barba

John Barba

John is an aging, yet avid golfer, writer, 6-point-something handicapper living back home in New England after a 22-year exile in Minnesota. He loves telling stories, writing about golf and golf travel, and enjoys classic golf equipment. “The only thing a golfer needs is more daylight.” - BenHogan

John Barba

John Barba

John Barba

Shot Scope V5 Golf Watch
Apr 3, 2024 | 14 Comments
Driver Shopping Do’s and Don’ts
Mar 29, 2024 | 5 Comments
John Barba

John Barba

John Barba





    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

      Bob M

      6 years ago

      John what shaft are you using in the Srixon Driver and what flex

      Reply

      gunmetal

      6 years ago

      Nice win for Srixon woods, er Taylormade again. Keegan still rocking the Taylormade as per usual.

      Reply

      Meredith Johnson

      6 years ago

      I am currently a Ping owner-G 30 driver—been using Srixon balls forever per Fuzzy Zoeller. Our group plays his course often. Would consider changing if demos were available at home course. Seneca Golf Club, where Kevin Greenwell has been teaching pro for years—coached many youngsters who have gone on to college as fierce competitors. Probably the largest number of rounds in Kentucky.

      Reply

      DC

      6 years ago

      Any chance we can get a similar test of the 565 for us who don’t rip it 300 yards? I’m currently hitting a 10 year old driver about 230-250 yards. And would love to know if upgrading to this could see significant improvement.

      Reply

      Mohd Saiful Sohod

      6 years ago

      Personally, If it is available in Malaysia for testing I would like to volunteer. I have two drivers, 1) Callaway Collection and 2) XX10.
      Both are giving an average of 210 to 220 m with estimated swing speed of 95 mph. Like to measured it since it is said to be lighter.

      Reply

      mackdaddy

      6 years ago

      Srixon has been making sweet gear for a few years now and these look great.

      Reply

      Puttingmatt

      6 years ago

      Thanks for the write up, I too share some of the opinions and will look at these. Cause I only get the 100 to 105 clubhead speed . Never been a long knocker , but do find the fairway often

      Reply

      Brandon

      6 years ago

      Why is it that pretty much all manufacturers use titanium cup faces for their drivers but steel cup faces for fairways and hybrids?

      Reply

      Graham Riley

      6 years ago

      More than likely the steel faces are because you are taking the ball off the turf with the possibility of connecting with stones, twigs and other objects but with the drivers you are hitting it off a tee – would be interesting to find out why from the guys that make them though.

      Reply

      DocDaddow

      6 years ago

      We asked exactly that question at the launch event Brandon. It’s purely down to cost. Cup face’s are expensive to tool up and create, especially if Srixon use the same material that’s in the driver face.

      Reply

      TheKiltedGolfer

      6 years ago

      You stated in your article: “Srixon is the only OEM offering the HZRDUS Handcrafted as stock.”

      Doesn’t Cobra offer one in their F8+ driver as a no up charge shaft?

      Reply

      Mark

      6 years ago

      $240 upcharge for the handcrafted in the F8+

      Reply

      thekiltedgolfer

      6 years ago

      Not sure what this is then that Cobra states on their website for the F8+:
      “True aftermarket “Tour” shafts feature premium materials” for the PROJECT X HZRDUS YELLOW 75 (X, S)

      thekiltedgolfer

      6 years ago

      I guess I don’t know what the difference is between the “True aftermarket ‘Tour’ shafts” and “Handcrafted” shafts besides the price.

      gunmetal

      6 years ago

      Do not lose any sleep over it. The stock shaft is a good shaft and will be just fine. Just get fit for the correct length, weight, and flex (in that order, too) and then practice.

      Unless of course you want to have a good shaft with a nicer paint job and higher price tag – then you need to get the “true aftermarket” or “non watered down” version, LOL.

      Reply

      Johnny Penso

      6 years ago

      Shiels has a review out already and this driver performs as good or better than his average of many drivers tested. Seems like a winner to me.

      Reply

      BurkeAliciouS09

      6 years ago

      Great article, John! I am interested to see if these guys start capturing more market share. To be honest, in my corner of Idaho, I have never seen any srixon products in play – other than golf balls. I would like to give these a swing at some point, however!

      Reply

      cksurfdude

      6 years ago

      Hmmm. Not looking for a new driver but now very intrigued by the 585 / HZRDUS Red combo.

      Was fitted earlier this year – using a 565 head – for a HZRDUS Yellow, which I ended up not liking … and had thought that the Red might actually have been better for me (but the fitter didn’t have it).

      Reply

      Josh

      6 years ago

      Looks very nice, but that alignment mark is super ugly and annoying. I wonder how hard it would be to remove it?

      Reply

      Peter

      5 years ago

      My thoughts exactly. Anyone tried taking acetone to that yet?

      Reply

      Padre

      6 years ago

      This is all fine, but at the end of the day aren’t the COR maxed out. The R&A and the USGA have set the COR limit at 0.83, so unless Im missing something I don’t understand why manufacturers constantly talk about ball speed, springy face etc. You can do what you want, but aren’t allowed to surpass the COR max.

      Shouldn’t they advancement be more in the realm of maximising this over the ENTIRE face as much as possible since this is the biggest problem ( loss of COR) on mishits.

      I bought a Callaway EPIC with the Jailbreak technology and it works. I find that shots outside of the sweetspt are less punishing with less drop off.

      Reply

      gunmetal

      6 years ago

      You are dead on in your thinking. Sadly the manufacturers can’t market a new driver by saying “this driver goes as far as our last model, and the previous model, and….” so they get creative with their deception. Yes they make improvements on off center contact, and that should be what they talk about because it’s real.

      Reply

      George P.

      6 years ago

      To be honest (and test results have proven this)….the biggest advancement in drivers over the last 10 – 20 years is the weight placement in the heads to maximize launch and minimize spin. Ball speeds have surely increased as well, but I watch driver comparison videos by Rick Shiels on YouTube, and older drivers had lower launch and much more spin than today’s high-tech drivers which launch high and sail through the air like a knuckleball. We can talk about COR all we want, but it’s the “high launch / low spin” revolution that’s added the most yards to everyone’s drives!

      Reply

      Nick

      6 years ago

      They don’t measure COR anymore. The new measurement is called CT (characteristic of time). It is an easier more portable test to conduct on site for your events. Most of the current drivers would fail a COR test but they don’t test for .830 anymore. Also when you see these marketing claims they are talking about average ball speed not max ball speed. A 10 year old driver hit dead flush will keep up with new stuff no problem. As soon as you miss hit it by say a half inch especially going towards the toe the old driver will fall behind. 10 drives with each and the old driver has 1 right with the new driver but also has the 6 out of the bottom 7.

      Reply

      Lee H

      6 years ago

      Nice article! It’s sparked my interest in trying these… Now just stop butchering the words guarantee and guarantees… Thank you!

      Reply

      Josh C

      6 years ago

      How does the feel/sound compare to the hollow tone down feeling of the new school drivers(rogue,m series)

      Reply

      Dave r

      6 years ago

      When are they coming to Canada . Can’t wait to try them,

      Reply

      gunmetal

      6 years ago

      “What that means is the Z 85 cup faces are 10% thinner than the Z 65’s, and as we’ve all learned in Golf Physics 101 – lighter and thinner means hotter and longer.”

      You guys lose me with this kind of rubbish. There are standards that have been in place for over 15 years that LIMIT how hot a driver can be. How is it that they get hotter and hotter? Don’t tell me it’s across the whole face. I’m confident Keegan, GMac, and McGirt have strike patterns that don’t go outside of the center of the face – so how are they magically gaining ball speed by picking up a Srixon and putting down their TM sauce? TM must not know how to maximize ball speeds on the center of the face. That’s it.

      Reply

      John Barba

      6 years ago

      Rubbish? Well, I’m sure it sounds like rubbish, but there are theoretical limits and then there are manufacturing limits. Srixon told us the 565/765 faces were thicker than the new faces due to the material used (Ti 6-4) and the fact their QA/QC people were VERY concerned about faces breaking. They could have gone thinner, but chose not to in deference to quality…others had chosen to go thinner, but some have had breakage issues. As a result, they suffered a bit on ball speed compared to their competitors.

      New material allows them to go thinner and get closer to theoretical max. Is it closer to that max than TaylorMade or Callaway? Maybe, maybe not. Every OEM has their own ways of getting closer to the theoretical limits, with varying degrees of success – maybe one day they’ll all get there.

      Are faces “hotter” today than 15 years ago? Whether it’s across the entire face or just the sweet spot, I’m fairly certain the answer to that would be yes – primarily due to material and manufacturing advances. Are we talking about a few yards on sweet spot hits? At most. For the rest of us, that all over the face stuff is what’s more important.

      Reply

      gunmetal

      6 years ago

      Thanks for responding, John. Essentially what I gather from your response is that Srixon told you that they haven’t been able to design/manufacture a driver that hits the USGA/R&A allowable CT between 239-237 because they used 6/4 ti in an effort to reduce breakage. That’s funny, but if that’s their story, that’s their story. You ask if Callaway and Taylormade are as close to the max as Srixon. Given that they have already been at the max for a very very long time, I’d say yes they are still there. Perhaps Srixon is just figuring this out (doubtful). The Adams XTD model released nearly 5 years ago had the maximum allowable CT. To quote from the WRX review “Every single XTD driver head endures four separate rounds of testing to ensure quality control and maximum USGA-legal spring effect. ”

      So yes, rubbish sounds harsh – but it really is rubbish. If Srixon were claiming that this new thinner material is allowing them to make the face as hot as allowable while also allowing them to relocate some of the weight savings to increase stability/MOI – I could totally buy that. It’s honest. Tangible to you and me? Probably not, but completely accurate.

      I totally could be wrong about Srixon’s capabilities to design drivers. Perhaps they are 5 years behind a defunct Adams…and the rest of the industry. I just sorta doubt that and think that their tour pros play what they want because their contract allows them to.

      John Barba

      6 years ago

      I think we’ll have to agree to disagree. I’m generally not one to bow at the altar of TaylorMade & Calloway, or WRX for that matter. Or Srixon, in case you’re wondering. I’ll give them credit for being upfront about the 565/765 drivers and why their tour staff did not embrace them – it was a ball speed issue and tour pros love them some ball speed. They now have at least 5 of their more prominent staffers using the new models – we’ll see if it lasts, but that’s the fact of the matter at this point.

      One thing Brian pointed out that I thought was interesting: their QA/QC procedures both here and at the Japanese plant in Kobe follow the relatively conservative philosophy set forth by Sumitomo Rubber Industries – they were able to go thinner with the 565/765 faces but chose not to due to breakage. Now, I’m sure you’ll agree that both Callaway and TaylorMade have had their share of face issues over the past couple of years – not that it’s been crippling to their business, it certainly hasn’t, but Srixon chose a different path. What they came up with was a very good driver for folks like us – but one that their tour pros eschewed.

      When it comes to manufacturers claims in general, I’ll err on the side of caution – even if it does come from Callaway or TaylorMade or Srixon, or even WRX.

      Weazil

      6 years ago

      It’s all about improving off-center COR through design and materials. Then achieving the targets for both center and off-center require tightening tolerances through improvements of manufacturing processes and QC. No product on the market has max COR on the entire face or even close to it, and every product has some variation in production.

      gunmetal

      6 years ago

      John – Actually none of their prominent staffers are using the driver in tournaments that matter. Hideki still rocking the Callaway, JB and Keegan are still playing the Taylormade in the Dell Championship in Boston. Not sure what McDowell is using as he doesn’t have any recent tournaments on Getty Images. Lowry was using the TM a couple weeks ago at Wyndham.

      This ISN’T because Srixon isn’t making a good product. Though it seems they now freely admit in the past that they favored rigidity over ball speed (which is a little strange to be honest) and their woods weren’t up to the leading manufacturers. This IS because Srixon doesn’t require them to use their drivers. You sign with Callaway, Taylormade, Ping, or Titleist you’re pretty much locking yourself into their driver. You sign with Mizuno, Srixon, Bridgestone – they’re happy to have you play their irons (and ball for Srixon and Bridgestone) but as long as you throw on their headcovers, they’re really not concerned with your driver. Maybe Srixon is ‘hoping’ that will change, but as long as their staff is free to do whatever they want, they’re going to do whatever they want.

      Gunmetal

      5 years ago

      Congrats to JB Holmes and Srixon on the win at Riviera today…. And Callaway with the driver, lol.

      Wonder what Srixon will tell you this fall when they come out with a new driver that their staff is just loving the higher ball speeds. Like seriously.

      Tider992010

      6 years ago

      These look good but remind me of the Nike VR-S driver from a few years ago.

      Reply

      Stacey

      6 years ago

      Exactly what I was going to say. The new Titleist drivers look like the old supertri as well. I would think the design aspect would be a top priority for originality.

      Reply

      George P.

      6 years ago

      Great review, John! I was intrigued about the previous Srixon’s, but now I’ll definitely be trying these for sure! The 785 lineup has me drooling. My G400 LST might be getting replaced. These look sweeeeeeeeeet!!!

      Reply

      Malky

      6 years ago

      Looks like my SLDR 430 might have a fight on now. What shaft was Harry using?

      Reply

      McaseyM

      6 years ago

      Those are some sweet looking woods! I’m noticing a similar crown to the Cleveland Launcher fairway and hybird, but without the silver accent. Love the bold guarantee about performance. looking forward to 2019’s Most Wanted Testing already

      Reply

      Berniez40

      6 years ago

      THere I was getting all hot and bothered to try these out, but low and behold–no high launch model. I’ve got a 12* Cranked up 2* with the adjustment, and a new Mitsubishi CK Red for even higher launch. I game Srixon Irons, and would love to game their woods. Sad to say 10.5*, in the non-adjustable model, I play the M2 not the M1, juist isn’t going to cut it. I love my Srixons, and hope some day to game their woods. I guess that day just won’t be today. P.S.–Good article.

      Reply

      John Barba

      6 years ago

      This same point was made on our Forum this morning, and it’s a good one. It’s important to note that’s the branding line between Srixon and Cleveland. The Launcher HB driver is non-adjustable, and available up to 12*. It’s a high launch driver with a high launch shaft.

      The benefit of two brands can also be a drawback, but my guess is they felt the line of differentiation had to be drawn somewhere.

      Reply

      mike

      6 years ago

      The free upgrade to hzdrs evenflow max high spin high launch shaft may do it.

      Reply

      Joe Golfer

      6 years ago

      The article did mention some free upgrades for the line of Hazardous shafts, but the Even Flow which you mentioned was listed as having a $100 upgrade price.
      It is still a great feature, considering so many OEM’s use those “made exclusively for” types of shafts rather than the “real deal” shafts. Just one of the reasons they guarantee the performance, I suppose.

      Tebo

      6 years ago

      Another $500 driver, yay/rah…

      Reply

      Jacopo

      6 years ago

      You want to become the richest of the cemetery ?

      Reply

      Mike

      6 years ago

      What shaft does the 2nd player use in his Ping driver?

      Reply

      steve s

      6 years ago

      While I appreciate the review using MGS staffers that hit the ball 300 yards doesn’t do much to convince the average golfer who hits the ball 200 to 240. I’ll bet it you have the 90-95mph guys hit these drivers the improvements will be in the realm of the data “noise”.

      Reply

      John Barba

      6 years ago

      Srixon’s own data is based on 95 to 105 MPH swings, which show 2 to 3 MPH ball speed increases. As always, one must consider the source.

      I’m a 240-250 hitter which, at my age, I’ll take. Two things I’ve noticed thus far, with only a handful of rounds with the Z 785 – I’m finding the fairway a little more consistently, and best drives are a bit longer – both verified via ShotScope. Gamer is/was the Mizuno JPX 900, which is a beast.

      Not sure if that helps, but at least it’s a little perspective.

      Reply

      Ian

      6 years ago

      I will try them out if I can find them in store.
      If not, I just might take them up on that guarantee offer. That’s a ballsy marketing ploy me thinks!

      Reply

      Rob C

      6 years ago

      They sound very good, and to put the money back guarantee out there, that is a first that I know of. Srixon must be confident or I’m sure the accounting guys would have stopped that in the tracks!

      Looking forward to trying them all.

      Reply

      808nation

      6 years ago

      Great write JB! I am really liking the new offerings from Srixon. I definitely want to try out their woods and hybrids when they come out.

      Reply

      Keith Pudney

      6 years ago

      It would have been a better test had a sub 100mph golfer been included in the test.Dispersion wasn’t mentioned, 10yds more into the woods isn’t any improvement.

      Reply

      John Barba

      6 years ago

      Fair point — as a person sitting there watching the two of them, dispersion wasn’t a problem for either golfer with either driver.

      With my own 98 MPH swing speed, I did see modest gains compared to my gamer, the JPX 900. In a handful of rounds played over the past few weeks, I am finding myself in the fairway more often, which is nice. Distance is hard to judge, but ShotScope data indicates best drives are a few yards longer, which makes the average is a little longer.

      Personally, I like being in the fairway better.

      chemclub

      6 years ago

      Great article john. Which model have you been playing with? Or have you been hitting both?

    Leave A Reply

    required
    required
    required (your email address will not be published)

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Golf Shafts
    Apr 14, 2024
    Testers Wanted: Autoflex Dream 7 Driver Shaft
    News
    Apr 14, 2024
    A Rare Masters ‘L’: Day Asked To Remove Sweater
    Drivers
    Apr 13, 2024
    Testers Wanted: Callaway Ai Smoke Drivers
    ENTER to WIN 3 DOZEN

    Titleist ProV1 Golf Balls

    Titleist ProV1 Golf Balls
    By signing up you agree to receive communications from MyGolfSpy and select partners in accordance with our Privacy Policy You may opt out of email messages/withdraw consent at any time.