Titleist TSi Fairway Woods (TSi2 and TSi3)
Fairway Woods

Titleist TSi Fairway Woods (TSi2 and TSi3)

Support our Mission. We independently test each product we recommend. When you buy through our links, we may earn a commission.

Titleist TSi Fairway Woods (TSi2 and TSi3)

Titleist TSi Fairway Woods – Key Takeaways

  • Titleist TSi fairway woods will be available in two models.
  • The TSi2 features higher launch and greater forgiveness.
  • The TSi3 offers a penetrating flight and movable weight technology.
  • The retail price is $299.

As is typically the case, the Titleist TSi fairway woods won’t receive the same amount of attention as the TSi drivers but that doesn’t mean there isn’t a story worth telling.

Titleist’s TSi fairway lineup will again include two models. Unfortunately for those looking for even more ATI 425, I’ve got nothing for you. TSi fairway woods feature 465 stainless steel faces. It’s not particularly exotic but it gets the job done.

Both the TSi2 and TSi3 are 175cc, so the visual distinction is again one of shape, not size. As was the case with TS, it’s important to understand that golfers who fit into the TSi3 driver may not fit into the TSi3 fairway. There’s little if any correlation between the two, which is why I’m going to fall back on one of my go-tos…

If at all possible, work with a fitter to determine whether TSi2, TSi3 or a pairing of the two is the right solution for your bag.

Titleist TSi Fairway Woods – ARC 4.0

an image of the Arc 4.0 slot on the Titleist TSi Fairway Woods

Titleist TSi fairway woods feature Version 4.0 of Titleist’s Active Recoil Channel – the company’s version of slot technology. Your refresher is that, like other slots, Titleist’s ARC allows the face to flex a bit more, which helps preserve ball speed on low-face strikes.

As clubhead geometry evolves with each release, ARC has followed suit. ARC 4.0 features a shorter (top to bottom) channel wall. The redesign freed up five grams of weight which Titleist used to reposition the center of gravity.

Other enhancements include improved aerodynamics and refined topline visuals. That last one is a catchall but it’s fair to say it starts with the TSi alignment graphic which, for my money, is an improvement.

Titleist TSi2 Fairway Wood

a photo of the Titleist TSi2 Fairway Wood

The TSi2 fairway wood offers a larger address footprint with a shallower face. It’s the higher launching, more forgiving of the two Titleist TSi fairway wood models.

Titleist describes the center of gravity location as low and deep (shocking, I know). What you really need to know is that the competitive set includes the “Max” offerings on the market so if “easy to hit” is at the top of your fairway-wood wish list, the TSi2 fairway is most likely to deliver.

The crown of the Titleist TSi2 Fairway Wood
Titleist TSi2 Fairway Wood

The TSi2 fairway does not offer movable weights. However, it can be tweaked for swingweighting purposes. The stock flat weight is nine grams. Five-, seven-, 11- and 13-gram weights are also available.

The TSi2 fairway wood is available in 13.5, 15, 16.5, 18 and 21 degrees. That last one is for right-handed golfers only.

Titleist TSi3 Fairway Wood

the Titleist TSi3 fairway wood

The TSi3 is taller and more compact from front to back. It’s the more workable of the Titleist TSi fairway woods. That’s the pleasant way of saying it’s less forgiving but that’s to be expected given the more forward center of gravity location. With that, the TSi3 fairway should produce a flatter trajectory as well.

As part of what Titleist describes as its Tour Shape, the TS3i features a softer toe. As with TSi3 drivers, the idea is to make the face appear open without actually being open. If you’re a strong fairway player or an aggressive swinger, you’re probably going to love it.

Having said that, for many, fairway woods are already among the hardest clubs to hit so golfers who already feel like their 3-wood is going nowhere but right may want to pair the TS3i with a Xanax prescription.

TSi3 Fairway – Weight Elevator

The "weight elevator" in the Titleist TSi3 fairway wood

The signature feature of the TSi3 fairway is, for my money, one of the most inspired movable weight solutions to date.

Titleist’s goal for the design was to enable heel-to-toe adjustability without moving the center of gravity back, buggering up the turf interaction, or, at a minimum, leaving the track exposed to fill with grass, dirt and other debris.

The solution has unofficially been branded “the weight elevator” and allows fitters (and golfers) to quickly adjust the position of the heel/toe weight without anything close to disassembly.

A double-threaded screw lifts the polymer and carbon fiber cover in just a few turns of the wrench. The entire process takes less than 10 seconds.

The track allows for three positions (toe, neutral or heel) and the cover almost entirely encapsulates the track, leaving only a couple of small notches exposed. It should keep the track almost entirely free of grass and whatnot.

It’s a bit of purposeful overengineering designed to save fitters time and headaches.

TSi3 Fairway – Heel to Toe Weighting

the heel-toe weight track on the Titleist TSi3 Fairway wood

As with the TSi drivers, Titleist has opted not to label the perimeter weight positions on the TSi3 as draw and fade. Instead, it’s using N (neutral), T (toe) and H (heal). Using industry-standard speak, the toe is your fade position and the heel is your draw setting. While that may confuse some, Titleist takes a hosel-first approach to correcting shot shape issues.

While the movable weights can assist in that, Titleist is a strong proponent of aligning the center of gravity with impact. Under this philosophy, the selection of weight position should be driven by ball speed.

Again, working with a fitter is advised.

The stock flat weight is 12 grams. Eight-, 10-, 14- and 16-gram weights are also available.

The TSi3 fairway wood is available in 13.5, 15, 16.5 and 18 degrees. The 16.5 and 18 versions are available in right-hand only.

An Emphasis on Weight

I didn’t touch on it in the TSi driver story but Titleist is putting a bit more emphasis on head weight as a fitting variable. While the stock weights in both the TSi fairway woods and drivers should be a good fit for a healthy percentage of golfers, Titleist wants you to understand that increasing headweight will boost MOI (moment of inertia) and often ball speed as well.

“We want golfers to swing the heaviest hammer they can without losing speed,” says Stephanie Luttrell, Director of Metalwood Development for Titleist.

Given the limitations of a typical fitting (time and fatigue), it’s not always possible to dial in weight during the primary fitting session but if your fitter offers a follow-up session, it’s an opportunity to further improve performance.

Titleist TSi Fairway Woods – Featured Shafts

The featured shafts for the Titleist TSi Fairway Woods

Featured shaft offerings (Titleist is no longer using the word “stock”) are the same for the driver, though fairway weights will typically be 10 grams heavier.

They include the Kuro Kage Black, Tensei AV Blue Raw, HZRDUS Smoke Black RDX and the Tensei AV White Raw.

Premium Featured Shafts ($200 upcharge) are Graphite Design’s Tour AD-DI, Tour AD-XC and Tour AD-IZ.

The retail price for both Titleist TSi fairway woods is $299.

 the crown on the Titleist TSi3 Fairway Wood
Titleist TSi3 Fairway Wood

If you’re willing to forgo the latest technology for a better deal, TS series fairways have been discounted to $249 while supplies last.

Consumer fittings for the TSi lineup begin today with full retail availability starting on Nov. 12.

For more information, visit Titleist.com.

For You

For You

Golf Shafts
Apr 14, 2024
Testers Wanted: Autoflex Dream 7 Driver Shaft
News
Apr 14, 2024
A Rare Masters ‘L’: Day Asked To Remove Sweater
Drivers
Apr 13, 2024
Testers Wanted: Callaway Ai Smoke Drivers
Tony Covey

Tony Covey

Tony Covey

Tony is the Editor of MyGolfSpy where his job is to bring fresh and innovative content to the site. In addition to his editorial responsibilities, he was instrumental in developing MyGolfSpy's data-driven testing methodologies and continues to sift through our data to find the insights that can help improve your game. Tony believes that golfers deserve to know what's real and what's not, and that means MyGolfSpy's equipment coverage must extend beyond the so-called facts as dictated by the same companies that created them. Most of all Tony believes in performance over hype and #PowerToThePlayer.

Tony Covey

Tony Covey

Tony Covey





    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

      Nick

      3 years ago

      Not using the Ati 425 face plate instead of stainless plate questions the true value of their new driver. Would like to see the weight elevator install more towards the back to aid in getting a higher ball flight.

      Reply

      Jordan

      3 years ago

      People buying the tsi3 do not want a higher flight. It’s whole design is based around a flatter more penetrating flight.

      Reply

      Kansas King

      4 years ago

      $300 for fairway woods with stainless steel faces is ridiculous. It’s not that stainless faces on fairways is bad it’s just if I’m paying a premium price I want a premium product. I’ll go buy a Maltby for $70 if I want a good stainless face before I drop $300 for about the same thing.

      Reply

      Mike

      4 years ago

      Totally agree, can’t imagine spending $600 for 2 fairway woods. And I can’t imagine that a prior year’s model for half the price would serve me just as well. Oh wait, that’s what I did! Over the summer I bought an epic flash 3W and 5W off the Callaway pre-owned website for the same price combined as just one of these woods. And I simply can’t imagine these clubs are going to serve me any better than what I bought, considering the epic flash were all the rage only a year ago.

      But, I’m sure they’ll appeal to some people, to each his own.

      Reply

      Quizzygolf

      3 years ago

      I guess I’m confused by the knock on stainless. I was under the impression all fairways were stainless construction, except some offering carbon crowns, but stainless faces nonetheless. You have the SIM from Taylormade with a titanium face but that is $399. Ping, Cobra, Titleist, Callaway, pretty much every major manufacture in golf uses stainless or am I wrong?

      Reply

    Leave A Reply

    required
    required
    required (your email address will not be published)

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Golf Shafts
    Apr 14, 2024
    Testers Wanted: Autoflex Dream 7 Driver Shaft
    News
    Apr 14, 2024
    A Rare Masters ‘L’: Day Asked To Remove Sweater
    Drivers
    Apr 13, 2024
    Testers Wanted: Callaway Ai Smoke Drivers
    ENTER to WIN 3 DOZEN

    Titleist ProV1 Golf Balls

    Titleist ProV1 Golf Balls
    By signing up you agree to receive communications from MyGolfSpy and select partners in accordance with our Privacy Policy You may opt out of email messages/withdraw consent at any time.