How Golf Clubs Are Made (The Forging Process)
News

How Golf Clubs Are Made (The Forging Process)

How Golf Clubs Are Made (The Forging Process)

There are many steps in the production of one of these clubs once its actual design has been accepted by the Master designer.

Step 1

The head starts life as cylindrical stick of mild iron, which is then heated to 1200 degrees Celsius, so that the iron maintains its chemical integrity. Note that this is the structure for the head and not the hosel, which is added later.

Golf Club Forging

Step 2

The heated cylinder is then struck with a massive forging hammer, which creates the initial rough shape of the head.

Golf Club Forging Process

Step 3

The edges are now trimmed and the rough head is now pounded again with the forging hammer. The force used is very precise, and along with the head of the rough head this creates the molecular structure of the head.

Step 4

The head is hit a third and fourth time, by which the head is now well defined and is in a smooth and unblemished state. Once in this state, the score lines and any artwork and iron numbers can be stamped into the head.

Forged Golf Irons

Step 5

The hosel now comes into the picture. The hosel cylinder is now spin welded onto the head in a very precise manner to make sure lofts and lies are of an exact nature.

Step 6

At this point we have a raw but technically advanced head, ready to be finished off by the Master Craftsmen.

Step 7

Grinding and polishing now takes place to make sure each head is taken to its specified weight. Each iron has its own designated weight which will generally see a 4 gram increment between irons, which allows for very tight swing weight matching.

Step 8

A final polishing is done in a purposely-built polishing barrel, which is capable of producing any sort of finish required via a variety of techniques. Now plating is applied, using either Nickel Chrome or W Nickel for a Satin Finish to the face with a touch of copper to the chrome for the rest of the club head and hosel.

The face now requires a light sandblasting to give it a bit of grip for the ball to munch on. The chrome is taped over here, allowing only the face to be blasted.

Miura Golf Iron

Now the club is ready, apart from painting in the number and model stampings.If any of you are lucky enough to own one of these works of art, enjoy them each time you take them out.
by Paul Smith


Get Stories Like
These Everyday!

For You

For You

We Tried It
Feb 19, 2024
This Training Aid Will Make You Hit a Draw
News
Feb 19, 2024
Testers Wanted: TPT “3 Shafts, 1 Feel”
News
Feb 18, 2024
Testers Wanted: Maxfli Tour Golf ball with MAX ALIGN Technology
Adam Beach

Adam Beach

Adam Beach

My name is Adam Beach. This place, this site, it’s more than just a business to me, it truly is an expression of who I am and what I believe in, down to my core. I feel the work I do is a reflection of who I am and the idea behind the work I do is more important than the work itself. You see, I don’t actually see myself in the golf business at all, I am in the business of caring. I am a guy who wakes up with one goal: do the right thing.

Adam Beach

Adam Beach

Adam Beach

Adam Beach

Adam Beach

Adam Beach

Adam Beach





    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    No comments yet. Start the discussion!

    Leave A Reply

    required
    required
    required (your email address will not be published)

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    We Tried It
    Feb 19, 2024
    This Training Aid Will Make You Hit a Draw
    News
    Feb 19, 2024
    Testers Wanted: TPT “3 Shafts, 1 Feel”
    News
    Feb 18, 2024
    Testers Wanted: Maxfli Tour Golf ball with MAX ALIGN Technology