COBRA Releases Fully 3D Printed LIMIT3D Irons
Irons

COBRA Releases Fully 3D Printed LIMIT3D Irons

Support our Mission. We independently test each product we recommend. When you buy through our links, we may earn a commission.

COBRA Releases Fully 3D Printed LIMIT3D Irons

Let’s start with the headline.  

The COBRA LIMIT3D irons are the first commercially available 3D printed irons. 

Because this isn’t my first day on the internet, I know some of you will read this and think (or scream in my comment section), COBRA is ripping-off Avoda, the small brand that recently received some attention for 3D printing irons for Bryson DeChambeau. 

C’mon, guys. It’s not like 3D printing a golf club is as simple as hitting the print button. Well, I suppose the act itself is exactly that easy but the button doesn’t work without years of development. 

COBRA LIMIT3D Irons are 3D Printed

In COBRA’s case, it has been working on 3D printed irons for the last half dozen years. While it has kept its cards close to its vest, COBRA has had 3D printed clubs on the PGA Tour for years.  

Rickie Fowler and Gary Woodland have played 3D printed COBRA clubs. 

When Kyle Berkshire cracked the face of his conventionally made utility iron, COBRA 3D printed a new one.  

That should resolve any questions you might have about the durability of 3D printed irons. 

And what about Bryson?  

He played COBRA 3D printed utility irons since 2017. He also played 3D printed versions of KING TOUR irons. One might surmise that his previous experience with COBRA is what led him down the 3D printing path with his newest irons. 

COBRA LIMIT3D Irons are 3D Printed

Cool story, but why is COBRA doing this? 

The short and simple answer is because it can.  

I will shout with my dying breath about how COBRA has never gotten the credit it deserves as one of the game’s great innovators.  

To an extent, that’s a necessity of its size but, nevertheless, the company has seldom been content to do things like everyone else. 

Where’s the fun in that? 

3D printing benefits 

What are the benefits of 3D printing? (You may have asked.) 

In a word, performance.  

It’s not that COBRA LIMIT3D irons will perform like no iron has before. You’re not going to get 10 more yards and you’re not going to rattle every flagstick from 150 yards but they do bring us closer to what is often regarded as the Holy Grail of iron design. 

It’s not lost on me that some of you prefer the look of a solid game-improvement shovels but the majority of us drool at even the possibility of an iron that offers the forgiveness of a game-improvement iron with the compact design footprint of a player’s iron. 

That’s what you’re getting with the COBRA LIMIT3D iron. 

And for sure, COBRA isn’t the first to claim game-improvement performance from an iron that looks like a blade. At times, there has been a hint of truth in that but really what we’re talking about are clubs that hid their size via design tricks. Those work to make an iron look smaller than it is but it’s bigger than a blade just the same. 

You get the clean lines,but not the true player’s shape. There’s always been a sacrifice: size, feel … often both. 

What separates COBRA’s LIMIT3D irons from the pack is that it delivers on the promise of forgiveness from a player’s shape. It’s not technically a blade but the LIMIT3D are more compact than COBRA’s KING TOUR irons

We’re talking about decoupling form and function and, in that respect, this might be the rare blade (or something like a blade) that will make you a better ball striker. 

How COBRA LIMIT3D irons are made 

COBRA’s 3D printing method might make Rumpelstiltskin proud. It’s not exactly straw into gold but the process that turns 316L stainless steel powder into a golf clubhead feels like one of those things that shouldn’t be possible. 

Full disclosure: I’d say the same thing about a camera. I mean, I look at something, click a button and then that thing I was looking at is captured forever. How does that work? 

I feel the same way about using laser beams to fuse powdered metal into the shape of a golf club. 

At this point, if you said sorcery was the only explanation, I’d be fine with it. 

A single iron head consists of approximately 2,600 layers. The machines that form the irons are capable of printing 20 heads in 24 hours. 

A quick aside: This isn’t the same process COBRA uses to make its 3D putters. It’s not a case of one method being better or worse than the other. It’s just different and COBRA chose the method most appropriate for task. 

While a compact but highly forgiving golf club is the result, the reason it’s possible (other than sorcery) is that 3D printing allows designers to create geometries that are far more complex than what’s achievable with forging, casting or milling. 

The internal lattice structure of the COBRA LIMIT3D irons

In the case of the LIMIT3D iron, the backside of the face is comprised of a dodecahedral lattice pattern that provides the structural integrity necessary to support the face while saving a metric shit-ton (that’s a technical term) of weight. 

FYI: The lattice pattern visible in the back cavity isn’t part of the structure. It’s a visual cue that serves to help tell the tech story. 

In a typical solid construction, the face piece or core of the club weighs between 100 and 122 grams. COBRA’s latticed core weighs just nine to 12 grams depending on the loft. 

Do the math, guys. We’re talking about massive savings. 

How did COBRA reallocate that mass? 

You know the answer. They used big chunks of tungsten in the heel and toe (a total of 70 to 100 grams depending on the loft) to drive the center of gravity lower and MOI numbers higher than any iron in their lineup. 

When the dust or, I suppose, the 316L steel powder settles, what’s left with is a golf club with a true player’s iron shape and forgiveness that surpasses game-improvement designs. 

Said another way: more speed, higher launch and more forgiveness in an eye-pleasing package. 

An address view of the COBRA 3D LIMIT3D Iron

COBRA LIMIT3D Performance 

In robot testing versus the KING TOUR, COBRA saw nearly 2 mph more ball speed and an additional five yards of distance with a 7-iron. 

The LIMIT3D is a degree stronger but the shaft is a tick shorter. Some of its speed is coming from loft, but not all of it. Expanding testing to include misses, the LIMIT3D is longer still and offers tighter dispersion. So, again, game-improvement performance from a club with a Tour-sized footprint. 

What about feel?  

On one hand, maybe you shouldn’t care about feel. On the other, it’s no small part of reason why people play player’s irons.  

I’ll reserve judgment until I have the chance to hit the LIMIT3D but COBRA’s modal analysis (a means to measure the frequencies of a clubhead as it vibrates and quantify feel) suggests an iron that’s much more similar to muscle-back than something like a player’s distance or game-improvement iron. 

Part of the selling point is that the COBRA LIMIT3D don’t just look like a player’s iron, they feel like one, too. 

COBRA LIMIT3D irons – How much and how many? 

There are only 500 Sets of the COBRA LIMIT3D Irons

As you’ve been reading along, you may be thinking: These do not sound cheap

Keen observation, chief. They’re not.

But if you do want them, I strongly suggest you bang the Buy Now button the second they go on sale. 

Limited is in the name (sort of) and the irons are just that. COBRA has limited production to 500 sets worldwide and only 300 of those will be available in the U.S.A.  

Sets will be 4-PW, RH only, and custom only. There is no stock shaft. Each set is built to spec. 

The retail price is $2,999.99. Sales begin (and likely end) on June 7. 

COBRA LIMIT3D 3D Printed irons have a small players iron shape

A postscript in all of this: How does 3D printing translate to other categories? 3D printed prototypes exist in every club category but the potential for advancement is likely greatest in the driver category. The requisite size and strength of a driver face means a significant amount of forwardly placed mass is non-negotiable.  

Other than the USGA, the face itself is likely the biggest obstacle to innovation. 

What if COBRA could achieve the same type of weight savings it did with the LIMIT3D iron in a driver? Would it make for the most meaningful breakthrough since titanium? 

I asked COBRA’s VP of Innovation, Mike Yagley, if he wanted to talk about how 3D printing could be leveraged in future driver designs.  

“Nope.” 

I think what he meant was “not yet.” 

For more information on COBRA LIMIT3D 3D Printed Irons, visit Cobragolf.com

For You

For You

LIV USGA LIV USGA
LIV Golf
Feb 5, 2025
USGA Makes Sensible Move By Creating LIV Qualifying Pathway
News
Feb 5, 2025
PING G430 Versus G440 Drivers (What’s New for 2025?)
Maxfli Honors Maxfli Honors
Buyer's Guides
Feb 5, 2025
Head To Head: Most Expensive Versus Least Expensive Stand Bag
Tony Covey

Tony Covey

Tony Covey

Tony is the Editor of MyGolfSpy where his job is to bring fresh and innovative content to the site. In addition to his editorial responsibilities, he was instrumental in developing MyGolfSpy's data-driven testing methodologies and continues to sift through our data to find the insights that can help improve your game. Tony believes that golfers deserve to know what's real and what's not, and that means MyGolfSpy's equipment coverage must extend beyond the so-called facts as dictated by the same companies that created them. Most of all Tony believes in performance over hype and #PowerToThePlayer.

Tony Covey

Tony Covey

Tony Covey





    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

      RI_Redneck

      8 months ago

      I have been looking for this very type of clubhead for decades. So, I scored a set on 6/7 from Carl’s Golfland (Kudos for fast delivery on 6/11!). As I already had a new set of Recoil Proto 125 F4 shafts and some Grip Master Roo Midsize grips for another build, I just got KBS steel shafts and Lamkin grips on the set. They are in the process of becoming what I hope is my ideal set of irons. I’ll post all details in the Forums.

      Reply

      Lefthack

      9 months ago

      Lol, 3D printed and right hand only. Are they unaware of the mirror function on the 3D printer? You would think they could built them to order.

      Reply

      MarkM

      9 months ago

      I would buy these in a heartbeat if I had 3 grand to throw around, but I don’t think they’ll be the last of their kind. I’d assume that at some point they’ll be able to streamline costs and ramp up production. Here’s to the future Cobra!

      Reply

      NH Golfer

      9 months ago

      Is it just me or can anyone else hear the rattling in the head?

      Reply

      david

      9 months ago

      NH there will be no rattling as it is one piece 3d printed. The tungsten weight are added after printing is done at the bottom toe and heal of each iron. They are a thing to behold when you see them up close.

      Reply

      Wolven

      9 months ago

      Why only RH, no molds, no stock! Reverse drawing and print for LH!!

      Reply

      David

      9 months ago

      Wolven the first 500 are RH only due to building process. There will be LH down the road, this is not uncommon when such new tech comes out. They are printed so no molds, and they are built to order so no back stock at this point.

      Reply

      WYBob

      9 months ago

      The concept of 3D-printed irons is intriguing and quite possibly a game-changer. The design innovation and flexibility the technology provides could be revolutionary. That said, spending $3000/set for a club you can’t test or get fit for before buying is a real leap of faith. With only 500 sets available, the risk to Corbra is minimal and there will be enough early adapters to gobble up every set. As the technology matures, the designs evolve, and the cost of production declines the result will be lower pricing at the consumer level. That is when this technology could have a real impact on the rest of us.

      Reply

      Donn

      9 months ago

      Again, Tony is a top top JOURNALIST. If only a few in regular news would follow his lead.

      Reply

      Yummy

      9 months ago

      Is there a video on how it was printed? And how do you get the tungsten in there while it’s being printed? Or is the face printed separate from the back (I assume they are) and then stuck together later? How do they get the clean finish like this after the printing? I would love to see all of that

      Reply

      Paul I.

      9 months ago

      First of all, I was not aware that clubs could be 3D printed, but it makes sense that if it can be done, it will be a game changer for the industry and for players. First of all, the design of the club is gorgeous. Who wouldn’t like to have a set that has the forgiveness of game improvement clubs, but looks like a players club. I can now see the day when I go to a fitting and then being sent a set of custom printed clubs exactly set up for my particular game. It can’t happen too soon for me.

      Reply

      Stephen C Wilson

      9 months ago

      $3000 per set looks like a fair price for what you would be getting. Custom made and custom fit, think of the price of drivers these days, $700 plus!!

      Reply

      BH

      9 months ago

      Am I the only one thinking of how much of a b*tch it would be to clean out that honeycomb?

      Reply

      Josh

      9 months ago

      That was my exact first thought. And why I moved to hollow body.

      Reply

      James C

      9 months ago

      That was my very first thought. My second thought is how this opens up a future of being able to order exact head weights for custom weighting schemes. I use MOI matching and will never play a flat swingweight set again, but it sucks having varying amounts of lead tape on all my clubs. Being able to order exact head weights would be incredible.

      Reply

      MarkM

      9 months ago

      BH, I saw a vid that says that honeycomb is not open to the outside world for just that reason. Must have a clear covering of some kind over it.

      Reply

      david

      9 months ago

      The honeycomb you see on the back is only cosmetic, the internal is where the magic is. The back portion will be easy to keep clean.

      Reply

      Paul

      8 months ago

      Really, you would worry about filth on the back side of your clubs? Unless you are pounding them into the ground, how is this even a problem?

      Reply

      Jack

      9 months ago

      I for one certainly haven’t given Cobra the credit they deserve in terms of technological innovation. These 3D printed irons are certainly a game changer. Might be as big of a deal as the F9 was and as other ‘game changing’ clubs that came before it such as the SLDR. I’m gutted i won’t be able to afford the price when these launch as i would genuinely love to try them out, blade-like looks with game-improvement forgiveness, who doesn’t want that?

      But more importantly, this now sets a precedent about golf-club manufacturing in the future, lighter clubs with better looks and more forgiveness is the perfect trifecta. This is definitely something to keep an eye on over the next few years.

      Reply

    Leave A Reply

    required
    required
    required (your email address will not be published)

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    LIV USGA LIV USGA
    LIV Golf
    Feb 5, 2025
    USGA Makes Sensible Move By Creating LIV Qualifying Pathway
    News
    Feb 5, 2025
    PING G430 Versus G440 Drivers (What’s New for 2025?)
    Maxfli Honors Maxfli Honors
    Buyer's Guides
    Feb 5, 2025
    Head To Head: Most Expensive Versus Least Expensive Stand Bag