These Three New Irons Sets Show Takomo Is Growing Up
News

These Three New Irons Sets Show Takomo Is Growing Up

Support our Mission. We independently test each product we recommend. When you buy through our links, we may earn a commission.

These Three New Irons Sets Show Takomo Is Growing Up

If there have ever been two phrases joined at the hip in golf, they are “direct-to-consumer brand” and “cult following.”

Well, I don’t know about “ever,” but you get the idea.

And if any DTC brand out there has the fastest-growing cult following, it’s the Turku, Finland-based Takomo. Since its launch in 2001, the brand has earned a reputation for its minimalistic Scandinavian design and its low prices.

Like many DTC startups, Takomo’s first offerings were what can be considered open-mold adjacent clubs. Those would be standard offerings from an Asian supplier with Takomo-specific tweaks, additions and specifications.

And low prices.

But it’ s 2026 now and Takomo is growing up. Today, the company is launching three revamped, upgraded, renamed (sort of), and recategorized (also sort of) iron sets, all with greater input from its internal design team. Takomo still rocks its minimalistic design vibe but the company is leveraging its growing internal design capabilities with a new manufacturing partner.

And the price? It’s not quite as low as it used to be (what is?) but the value remains solid.

New Takomo mk ii irons

Let’s take a look.

The new Takomo MKII irons: Same thing, only different

Again, sort of.

Let’s start by getting the nomenclature out of the way as it represents Takomo reshuffling its deck slightly.

First, Takomo is replacing its original (and best-selling) game-improvement iron, “Iron 101,” with the new Iron 101 MKII. The “MKII” represents Takomo’s second generation.

Got it? That one’s easy. Now for the hard part.

Takomo’s old player’s distance iron set, “Iron 101T,” is being replaced with an upgraded set, Iron 201 MKII.

Note the subtle yet distinct numerical shift with an alphabetical deletion. Now pay attention to the third iron, as there will be a test at the end.

Takomo’s old, forgiving forged cavity-back, “Iron 201,” is being replaced with the entirely new-from-the-ground-up Iron 201T MKII. Additionally, Takomo is giving the 201T MKII its own newly christened club category: “player’s precision.”

The new 101 and 201 MKII are cast, hollow-body irons, and look virtually identical to the irons they’re replacing. When minimalist design is your calling card, that’s inevitable.

“The simple answer is that it plays into our design philosophy,” Takomo Head of Product Teemu Laine tells MyGolfspy. “When you keep things minimalist, you can’t expect a huge difference in models.”

The curveball is the 201T MKII. It’s also a cast, hollow-body club. It carries the same DNA as its MKII brothers even though it’s replacing a forged cavity-back.

Takomo mk ii 201T irons

“There are definite visual similarities,” says Takomo Chief Marketing Officer Sean McCullum. “We want to keep them tied together because one of the things players love about the Takomo brand is this clean, minimalist design aesthetic.”

What’s new, what’s different

Perhaps the biggest change in the new MKII series is Takomo’s supplier. After breaking into the business with a Chinese manufacturer, Takomo is now using a Taiwanese supplier with a factory in Vietnam. It’s the same partner the company chose for its recent driver and wedges.

“There’s no big, sexy, brand-new tech that we can put a snappy name on and trademark to run in ad campaigns,” says McCullum. “What we have done is switch manufacturing partners to increase the quality.”

“The casting process has improved to remove impurities from the steel,” adds Laine. “The final product is a lot more consistent iron to iron and set to set. It’s not something  you’ll notice with the naked eye but it’s a big deal for us because we don’t want to compromise on quality.”

Another change for Takomo is that all three iron sets now feature variable-face thickness in the mid and long irons.

“What we’re trying to achieve is a larger sweet spot in the longer irons,” Laine explains. “The idea is to make toe or heel strikes more forgiving and boost off-center strikes a little bit.”

As all three sets are hollow-body, sound and feel can be a concern. Takomo chose not to fill the cavity with foam or urethane, instead opting for strategically placed hot melt to dampen vibration.

“We don’t want to over-tech stuff just for the sake of putting it in,” adds Laine. “We want to keep it simple. Everything that’s in the head is there for a reason.”

About that “player’s precision” iron …

The new 201T MKII is the most intriguing of the new trio. Takomo says it bridges the gap between a player’s cavity-back and a player’s distance iron: longer and more forgiving than the former, more compact and – hold on to your Cheerios, kiddies – weaker-lofted than the latter.

“Culturally across our workspace, pretty much everyone on the team here is anti-loft jacking,” says McCullum.

Torch and Pitchfork Nation won’t have much to say about the 201T MKII. You’d need a heart of stone to complain about a compact hollow-body with a 47-degree pitching wedge and a 34-degree 7-iron.

“There’s this blank space with a ton of golfers who are amazing ball strikers who don’t need a ton of workability but still value forgiveness,” says McCullum. “They could fit into a player’s distance iron but they’re good enough to prefer a thinner sole, shorter blade and thinner topline, and they’d like a little distance help.”

Takomo mk ii 201T topline

The new Takomo 201T MKII is trimmed down, sleeker and cleaner than the forged cavity-back Iron 201 it’s replacing. The hollow-body construction gives it a muscle-back blade look. The 4- through 7-irons feature a tungsten bar in the sole to lower CG and add forgiveness. The 8-iron through pitching wedge have a lighter steel bar for a higher CG and more spin control.

“We wanted to make the head smaller and the sole thinner,” says Laine. “But we still wanted the CG low for optimized ball flight and still get enough spin for a better player, even though it’s a hollow body.”

So, a compact player’s distance iron that spins? We can say right now the Takomo 201T MKII won’t win any distance contests. However, “long and forgiving enough with descent angle and spin” might just make it a unicorn.

Thinking final thoughts on the new Takomo irons

If Takomo were a mainstream OEM, changing nomenclature the way it’s doing with the MKII series would totally freak out retailers. But since it’s a DTC brand, Takomo doesn’t have that problem.

“Better to do it now rather than wait until the next round of upgrades in three or four years,” says McCullum. “A little head-scratching now is way better than mass confusion and re-education later.”

The naming progression makes sense if you think of university class levels. The 101 is Intro to Golf. The 201 is Advanced Golf while the 301 would be Graduate Golf. When you sell online, these distinctions are important.

Takomo mk ii 101 irons

Despite its commitment to Scandinavian minimalism, Takomo did find it necessary to add at least a little cosmetic differentiation to the MKII series. The 101 MKII, for all its hollow-body forgiveness, looks a lot like the 201 MKII. To differentiate, the 101 features a sandblast texture on the lower pad portion of the backside. The 201 is sandblasted on the upper portion of the backside. The 201T isn’t sandblasted at all.

“Now, when we discuss the club and the super-subtle differences in appearance, we’ll be able to teach our customers what kind of club they’re looking at,” explains Laine.

Again, when you sell online, these distinctions are important.

As to where Takomo is going, these second-generation irons represent a key milestone. Four years ago, Takomo was a startup. If we apply the crawl-walk-run analogy, Takomo made it through the crawl stage and has been walking. The new iron launch shows the company is starting to put a little pep in its step.

“Our database of information looks quite different now than it did four years ago,” admits Laine. “That’s going to play into our future development.”

The new Takomo MKII irons: Specs, price and availability

All three Takomo MKII iron sets are cast, with faces made from thin 17-4 stainless steel. The new 101 MKII has shifted a bit from the previous generation. Takomo has dropped the 4-iron and added a gap wedge as standard. The 201 and 201T both feature 4-iron through pitching wedge.

At launch, you can choose either the KBS Tour or KBS Tour Lite as your shaft with a Lamkin Crossline grip. Takomo will be adding graphite options (it says “soon”) including the Mitsubishi MMT and the True Temper Denali. Additionally, the company expects to finalize a deal with True Temper sometime this summer to add Dynamic Golf and Elevate shafts to its offering.

Like everyone else, Takomo is raising its prices slightly this year, between $60 and $90 per set. The new 101 MKII irons run $579 (5-GW) while the 201 MKII is $649 (4-PW).

The new 201T MKII iron set is $679 (4-PW).

For You

For You

Instruction
Jun 9, 2026
If You Still Play Long Irons, Copy This Thought From Ludvig Åberg
PLM 2025_Most Wanted_Foresight GC3 PLM 2025_Most Wanted_Foresight GC3
News
Jun 9, 2026
College Golf Tournament Prep Looks Nothing Like It Did When I Played
News
Jun 9, 2026
The Best Father’s Day Golf Gifts That Won’t Break the Bank
John Barba

John Barba

John Barba

John is an aging, yet avid golfer, writer, 6-point-something handicapper enjoying life in beautiful New Hampshire. He loves telling stories, writing about golf and golf travel, and enjoys classic golf equipment. “The only thing a golfer needs is more daylight.” - BenHogan

John Barba

John Barba

John Barba

Driver Callaway Elyte Triple Diamond Mini Driver TaylorMade R7 Quad Mini
Fairway Wilson Dynapower Carbon Irons Titleist T250/T350 Combo
Wedges Cleveland RTZ Putter Scotty Cameron Select Newport 3
Ball Titleist Pro V1x  
John Barba

John Barba

John Barba





    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

      BigBoiGolf

      5 months ago

      The manufacturer is the same one that makes clubs for RAM, etc. Pretty sure the old one was Xiamen-Jasde. Doesn’t matter anyways, they raised prices and are hawking 431/17-4 stainless as “premium” when it isn’t. Forged is premium because of the soft feeling, whereas casting is generally about manufacturing cost savings. I would know since I will be offering DTC options soon.

      Reply

      Andrew

      5 months ago

      Anyone with OCD won’t be able to buy the 201Ts. Look at the loft gapping; it’s all over the place.

      Reply

      Jason S

      5 months ago

      Interesting that all of the 101/201 line is now hollow-body. I can imagine those that had and liked the original 201 aren’t going to be overly happy about that, since it will force them into the 301’s to keep a single piece forging. I had the original 101’s and wasn’t overly impressed. Sure, cheap. But I got what I paid for. My money will continue to go elsewhere.

      Reply

      Rob

      5 months ago

      The fit/finish of these irons, at least in the close up pictures, looks a little suspect.

      Reply

      HikingMike

      5 months ago

      It doesn’t make sense to me that they now have a 201 MKII which is supposed to be players distance (replacing 101T), and a 201T MKII which is supposed to be the replacement of the forged cavity-back (replacing 201). Those are very different, but I guess since they are both hollow bodies now, they are closer together? And I would prefer their naming to use just one number and letter combination. I think that’s enough. There are more numbers out there. They could have a 401 or a 501. And what about the other two digits? What’s the point of naming 201 if you don’t bother with 202 or perhaps 211? The only reason I can think of is that they just threw more naming on there with the MKII so they can stopgap and for an easier transition for people to know the naming temporarily and they will change it within a year to ease the transition. But they are a DTC. If they have more flexibility that doesn’t make sense. The MKII seems completely unnecessary.

      Interesting they are moving manufacturing to Taiwan/Vietnam. I remember reading that Orka was made in Taiwan as well.

      Reply

      MGoBlue100

      5 months ago

      Interesting stuff, JB. I’m SUPER intrigued, but have cold feet b/c I’ve never had a chance to even HOLD a Takomo, let alone hit balls. I may still pull the trigger, but I’ll be gritting my teeth. 😬

      Reply

      Darren

      5 months ago

      New Mizuno MP-13 and 15 are £1,680. Yes, there will always be those that will buy them, but I think we are reaching a tipping point where more and more people will check out and take a gamble on alternativea. The DTC vacum that has already established will gather more and more traction.

      Reply

      WYBob

      5 months ago

      Forged vs. Cast. Japanese manufacturing vs. Vietnamese. Multi-material forged construction vs. cast steel. In house unique designs vs. “greater input from its internal design team.” $$$ vs. $$. There are valid reasons why the Mizuno’s cost more, and only you can determine if they are worth the additional cost to you. That said, I’d suggest that Ben Hogan’s DTC offerings makes a tougher for the OEMs to justify their pricing. But again, it’s up to each consumer and what is important to them.

      Reply

      vito

      5 months ago

      I like the Takoma product. Hit my friends Takomas last spring. What I don’t like is that you can’t customize a set. I don’t use a 4 and 5 iron anymore so I’d like to buy 6 thru pitch(or gap when available) In conversations with Takoma they aren’t offering customization, yet, although they have no timetable. And since the 101’s are loft jacked compared to the others I’m not sure I’d even use the 6 iron from that set.

      Reply

      Alex

      5 months ago

      But you can buy the heads separately — that’s what I did and stuck them on true temper elevates. I sold the heads (or single iron or two you can’t hit) on eBay . The old 4 iron head would make a decent driving iron for someone.

      If I lived in IL, I would definitely drive for a Sub70 fitting (although they did a pretty good job fitting me over the phone for their old 739s). I live reasonably close to Vancouver, BC, and am contemplating a Haywood golf fitting with graphite shafts (I’m thinking of transitioning out of steel shafts)

      Reply

      Papa 3-Putts

      5 months ago

      I have to admit that when these popped up on my radar yesterday, it was sort of a yawn for me.

      Still not sure I’d buy them – the whole “no fitting, sight unseen” part sort of kills it…but I’m definitely intrigued by the 201T.

      Great article, John!

      Reply

      Livininparadise

      5 months ago

      Yes, I 100% believe in being fit. I would rather spend more, or play a “lesser” club, then buy off the shelf

      Reply

      Rob

      5 months ago

      The prior generation was very customizable… lie, loft, length, grip, shaft, etc… were all adjustable from factory, they just weren’t quick ship available when customized (obviously)
      I’m sure these new mkII’s will be as well.
      It was commonly suggested to get fit for a TM p790, p770, or p7cb for their 101, 201, 301 options from the previous generation. This time it looks like they’re inspired by a different head design aesthetic. But the terminology still sounds the same ( cast, hollow-body clubs)

      Reply

    Leave A Reply

    required
    required
    required (your email address will not be published)

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Instruction
    Jun 9, 2026
    If You Still Play Long Irons, Copy This Thought From Ludvig Åberg
    PLM 2025_Most Wanted_Foresight GC3 PLM 2025_Most Wanted_Foresight GC3
    News
    Jun 9, 2026
    College Golf Tournament Prep Looks Nothing Like It Did When I Played
    News
    Jun 9, 2026
    The Best Father’s Day Golf Gifts That Won’t Break the Bank